This command removes an image from the FIS. The flash memory will be erased as part of the execution of this command, as well as removal of the name from the FIS directory.
Note: Certain images are reserved by RedBoot and cannot be deleted. RedBoot will issue a warning if this is attempted.
RedBoot> fis list Name flash addr Mem addr Length Entry point RedBoot 0xA0000000 0xA0000000 0x020000 0x80000000 RedBoot config 0xA0FC0000 0xA0FC0000 0x020000 0x00000000 FIS directory 0xA0FE0000 0xA0FE0000 0x020000 0x00000000 junk 0xA0040000 0x8C400000 0x020000 0x80000000 RedBoot> fis delete junk Delete image ‘junk’ - continue (y/n)? y ... Erase from 0xa0040000-0xa0060000: . ... Erase from 0xa0fe0000-0xa1000000: . ... Program from 0x8c7d0000-0x8c7f0000 at 0xa0fe0000: .